Precise Profile Diamond Radius & Angle Dresser, Made in China – PRA-110
- Extremely accurate, this Radius and angle Dresser can dress 2 angles tangent to a radius in one continuous motion to within.0001″ (0.002mm).
- Fast and easy set-ups without elaborate accessories; only tools needed are a micrometer and a hex key wrench.
- Set-up to dress 2 angles takes less than 15 seconds and 1 radius plus 2 angles approx. 3 minutes only.
- Precise and sharp contours, concave or convex, are consistantly obtained at a full 180 range.
- Made from hardened, ground, and lapped allow tool steel.
- No exposed wear surfaces, swivel on sealed bearings.
- Wheel dresser is furnished complete with base featuring one inch adjustment.
- Graduated micrometer knob provides fine adjustment to accurately dress small radii.
Specifications:
- Dressing Capacity: 8″ Wheel Diameter
- Range: Convex Radii 0 to 1.500″
Concave Radii.030″ to 1.500″
- Height to center of diamond: 6-1/2″
- Overall Height: 7″
- Base Dimensions: 4-3/4″ x 3-1/2″ x 1-1/4″ high
- Weight: 23 lbs.
View Replacement Diamonds:
- 3900-0097
- 3900-0077
- 3900-0078
- 3900-0086
- 3900-0087
- 3900-0088
See all Precise Profile Diamond Radius & Angle Dressers
| Dressing Capacity |
8″ Wheel Diameter |
| Range |
Convex Radii 0 to 1.500″ Concave Radii.030″ to 1.500″ |
| Height to center of diamond |
6-1/2″ |
| Overall Height |
7″ |
| Base Dimensions |
4-3/4″ x 3-1/2″ x 1-1/4″ high |
| Weight |
23 lbs. |
| Dressing Capacity |
8″ Wheel Diameter |
| Range |
Convex Radii 0 to 1.500″ Concave Radii.030″ to 1.500″ |
| Height to center of diamond |
6-1/2″ |
| Overall Height |
7″ |
| Base Dimensions |
4-3/4″ x 3-1/2″ x 1-1/4″ high |
| Weight |
23 lbs. |
